L200 L4-2.2L VIN F (2002)
1. Install the power door lock electrical connector and 2 lock rods to the latch mechanism.
2. Position the latch mechanism to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the screws to the latch mechanism.
4. Tighten the top screw first, the bottom screw second, and the middle screw last.
Tighten screws to 10 Nm (89 lb in).
5. Install the rear door window run channel. Refer to Rear Side Door Window Channel Replacement (See: Rear Door Window Glass/Rear Door
Window Glass Weatherstrip/Service and Repair/Door Window Channel).
6. Install the rear door window weatherstrip. Refer to Rear Side Door Window Weatherstrip Replacement (New Style) (See: Rear Door Window
Glass/Rear Door Window Glass Weatherstrip/Service and Repair/Door Window Weatherstrip/Weatherstrip Replacement - Rear Door Window
(New Style))Rear Side Door Window Weatherstrip Replacement (Old Style) (See: Rear Door Window Glass/Rear Door Window Glass
Weatherstrip/Service and Repair/Door Window Weatherstrip/Weatherstrip Replacement - Rear Door Window (Old Style)).
7. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement (See: Rear Door Panel/Service and Repair).
8. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement See: Rear Door Panel/Service and Repair
