L200 L4-2.2L VIN F (2002)
Trim Panel: Service and Repair
Pillar Trim
Body Hinge Pillar Garnish Molding Replacement
Body Hinge Pillar Garnish Molding Replacement
Removal Procedure
1. Remove the upper push pin fastener using a trim panel tool.
2. Remove the fuse box door and pull on the hinge pillar molding at the clip location to disengage the molding.
3. Slide the hinge pillar molding out from under the carpet retainer and remove the hinge pillar molding.
Installation Procedure
1.
Slide the hinge pillar molding into the carpet retainer.