L200 L4-2.2L VIN F (2002)
5. Remove cap and gasket from lock cylinder.
Important: When the shutter is removed, the shutter springs may fall out.
6. Remove the shutter and the shutter springs.
7. Insert the key into the cylinder, turn it a quarter turn clockwise and remove the cylinder from the housing.
Important: When the tumblers are removed from the lock cylinder tumbler, the springs may fall out.
8. Push the tumblers out of the lock cylinder using a thin bladed screwdriver.
9. If necessary, remove the sidebar assembly by pushing it inward while tapping the cylinder causing it to fall out.
Assembly Procedure