L200 L4-2.2L VIN F (2002)
6. Align the encapsulated glass to the roof in the 4 locations as indicated by the arrows, 0-1 mm (0-3/64 in) lower than the roof in the front and 0-1
mm (0-3/64 in) higher than the roof in the rear.
7. Tighten the encapsulated bolts.
Tighten the encapsulated glass-to-sunroof module fasteners to 4 Nm (35 lb in).
8. Install the "U" cover by snapping the sides to the sunroof assembly.
9. Operate the sunroof to the 1/4 open position.
10. Install the 4 screws to the "U" cover.
Tighten the sunroof module "U" cover retaining screws to 4 Nm (35 lb in).