L200 L4-2.2L VIN F (2002)
4. Install the rear seat back cover rear panel with retainers with a plastic mallet.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the rear seat back outer hinge with the outer hinge fasteners.
Tighten the rear folding seat back outer hinge fasteners to 20 Nm (15 lb ft).
6. Install the rear seat back cover J-strip over the seat back panel.
7. INSERT GRAPHIC SMVIS 79452AA1
Starting at the rearmost portion of the escutcheon, locate the rear tab into the latch assembly. Push down to fully secure the escutcheon.