L200 L4-2.2L VIN F (2002)
8.
Stretch one seat cover drawstring over the corresponding seat frame retaining stud to free the drawstring from the stud. Repeat for opposite side of
seat cover
9.
Remove remains of old drawstring and discard.
Installation
1.
Cover the sharp-edged 1ip around the perimeter of the pan to within 3" (7.62cm) of the front edge of the seat pan with 44" (111.76cm) of
Precision-Trim edge molding (P/N # 60 super black), (Prostripe(R) edge molding P/N M79-050 02 black) or equivalent.