L200 L4-2.2L VIN F (2002)
Front Door Weatherstrip: Service and Repair
Weatherstrip - Front Door
REMOVAL
1. Remove weatherstrip from door opening by starting at the seal joint at the bottom of the door opening.
2. Slowly pull seal loose.
INSTALLATION
1. Start seal over flange area in position noted above.
2. Press seal over flange firmly to seal.
3. On new design seals, pull rope shown to assist in folding inner lip of weatherstrip over interior trim.
4. Install weatherstrip to locate molded joint in position shown.
5. Inspect entire seal for proper installation.
