L200 L4-2.2L VIN F (2002)
9.1
Open the HVAC filter access panel.
9.2
Remove rubber plug in bottom of cowling.
9.3
Remove top brake booster-to-brake booster bracket bolt.
10. From under hood, remove booster.
INSTALLATION
1. Position booster in vehicle. Install brake booster-to-brake booster bracket attachment bolts.
Torque:
Brake Booster-to-Brake Booster Bracket Bolts: 20 Nm (15 ft. lbs.)
2. Install rubber plug in bottom of cowling.
3. Close and secure HVAC access panel.
4. Install booster push rod onto brake pedal pushrod pin with retainer.