L200 L4-2.2L VIN F (2002)
NOTE: When handling electronic parts identified as ESD sensitive, you should observe the following guidelines. These guidelines reduce possible
electrostatic charge build-up from your body and from electronic parts in the Saturn retail facility.
Handling ESD-Sensitive Parts Notice (6756)
Electrostatic Discharge (ESD) can damage solid-state electrical components. ESD-susceptible components may or may not be labeled with the ESD
symbol. Handle all electrical components carefully. Use the following precautions in order to avoid ESD damage:
Touch a metal ground point in order to remove your body's static charge before servicing any electronic component - especially after sliding across the
vehicle seat.
Do not touch exposed terminals. Terminals may connect to circuits susceptible to ESD damage.
Do not allow tools to contact exposed terminals when servicing connectors.
Do not remove components from their protective packaging until required to do so.
Not all parts that can be damaged by an electrostatic discharge have an ESD label. Components that can be damaged by an electrostatic discharge are:
^
Instrument Panel Cluster
^
Powertrain Control Module (PCM)
^
Cruise Control Module
^
Audio system components
^
Electronic Brake/Traction Control Module (EBTCM)
^
Electronic Ignition (EI) Module
^
Sensing and Diagnostic Module (SDM)
^
Remote Keyless Entry (RKE) Transmitter (internal circuit board only).
^
Body Control Module (BCM)
^
Engine Control Module (ECM)
^
Transmission Control Module (TCM)
^
Fan Control Module
