L200 L4-2.2L VIN F (2002)
7. Use bolts removed from sprocket access plate and install Water Pump Holding Tool J4365 1.
8. Remove water pump sprocket bolts.
IMPORTANT: Be sure to remove retaining bolt that is accessed from front of engine block.
9. Remove water pump retaining bolts.
10. Remove water pump assembly.
INSTALLATION
NOTICE: Prior to installing the water pump read the entire procedure. Pay special attention to avoid part damage and to ensure proper sealing.
1. Install water pump assembly.
2. Install water pump bolts. Initially finger tighten bolts
Torque:
