L200 L4-2.2L VIN F (2002)
chain links.
INSTALLATION
IMPORTANT: If balance shafts are not correctly timed to crankshaft the engine may vibrate or make excessive noise.
1. Orient the timing marks on the balance shafts.
1.1.
The intake side balance shaft timing mark should be pointing up.
1.2.
The exhaust side balance shaft timing mark should be pointing down.
2. With balance shafts oriented, install balance shaft crankcase sprocket onto crankshaft.
3. Place number one piston at Top Dead Center (TDC).
NOTICE: The crankshaft keyway slot will be pointing up (12 o'clock position) when set at TDC.
4. Install balance shaft chain with colored links lined up with marks on balance shaft sprockets with mark on crankshaft sprocket.
IMPORTANT: There is one (1) copper link and two (2) chrome links on balance shaft chain.
4.1.
Orient chain so that copper (1) and chrome (2) links are visible.
4.2.
Place copper colored link (1) onto timing mark on intake side balance shaft sprocket.
4.3.
Working clockwise along chain place first chrome link in line with timing mark on crankshaft sprocket.
4.4.
Align last chrome link with timing mark on exhaust side balance shaft sprocket.
