L200 L4-2.2L VIN F (2002)
Rocker Arm Assembly: Service and Repair
ROCKER ARM AND/OR VALVE LASH ADJUSTER REPLACEMENT (IN-VEHICLE)
TOOLS REQUIRED
-
J43655 Camshaft Sprocket Holding Tool
NOTICE: The Camshaft Sprocket Holding Tool J43655 must be used to remove one or both camshafts at the same time. The engine's crankshaft can
not be rotated with the camshaft(s) removed.
The L61 engine camshafts, rocker arms, valve lash adjusters, valve springs, and seals can be serviced without removing the exhaust system, vibration
damper, front mount, or front cover. The following procedure must be followed to prevent damage to the camshafts, lash adjusters, cylinder head, and
lower timing chain guides.
REMOVAL
1. Remove camshaft(s).
2. Remove rocker arms.
