L200 L4-2.2L VIN F (2002)
Auxiliary Blower Motor: Diagram Information and Instructions
Fuse Block Details
Fuse Block Details contains schematics that show all of the wiring between a fuse and the components connected to that fuse. The Fuse Block Details
can be very helpful in locating a short circuit that caused a fuse to open.
Ground Distribution
Ground Distribution contains schematics and locations of all grounds on the vehicle. This information can be a time-saver when troubleshooting a
ground circuit problem.
Harness Connector Faces
The harness connector faces for all of the connectors used in the vehicle. These views can be used to show what the connector looks like and where a
particular terminal in the connector is located. The connectors are labeled using the name of the component they are connected to, as well as the color of
the connector and the connector number. Beside each connector is a chart that lists the connector cavities, wire color, wire size, circuit number, and
circuit function. Under each chart is the location of the connector, the color of the connector test probe that goes to that connector, and the GM part
number/Saturn Special Tool Catalog part number of the tool to use to remove the terminal in that connector.
Service Parts Identification Label
To aid service and parts personnel in identifying options and parts originally installed, a Service Parts Identification Label has been placed in the vehicle.
Refer to the Specifications Quick Reference for the location of the label and the definition of the option codes.
Wire Sizes
Handling Electrostatic Discharge (ESD) Sensitive Parts
