L200 L4-2.2L VIN F (2002)
1. Slide heater core into HVAC module being careful not to damage foam seals.
2. Install heater core retaining strap and screw.
Torque:
Heater Core Retaining Strap Screw: 1.0 N.m (9 in-lbs)
3. Install bushings and O-rings onto heater core pipes.
4. Install heater pipes into core and install plastic clamps. Heater pipe clamps will only go on one way. Lower clamp hinge fits into tab of heater core
retaining strap.
