L200 L4-2.2L VIN F (2002)
85. If equipped with cruise control, connect cruise control switch connectors and attach harness to steering wheel.
86. Connect inflator module wiring harness and install harness integral connector lock device.
87. Install inflator module into steering wheel. Be sure to seat all four attachment points.
88. Enable the SIR system. (Refer to "Enabling the SIR System" procedure.)
89. Install heater inlet hose (closest to driver's side).
89.1 Hold hose by black quick connect collar and slide onto heater core pipe until quick connect collar engages over bead on heater core pipe.
89.2 Ensure that a green band is visible in quick connect collar.
