L200 L4-2.2L VIN F (2002)
Alignment: Service and Repair
Front Wheel Alignment
FRONT WHEEL ALIGNMENT
^
TOOLS REQUIRED
-
SA9140E Torque Angle Gauge
FRONT WHEEL CAMBER
IMPORTANT: Rear wheel alignment angles must be set to correct specifications before front wheel alignment angles are adjusted.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST. TO HELP AVOID
PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE
END FROM WHICH COMPONENTS ARE BEING REMOVED.
1. Raise vehicle on hoist.
2. Remove wheel and tire assemblies.
3. Remove the two strut to knuckle nuts and bolts and discard.