L200 L4-2.2L VIN F (2002)
7. Using Torque Angle Gauge SA9140E (or equivalent), tighten rear axle control arm bolts using the torque angle method.
^
Rear Axle Control Arm Bracket-to-Body Bolts: 90 Nm (66 ft. lbs.) + 30° to 45°
8. Repeat procedure for other rear wheel.
Order of Adjustment
ADJUSTMENT
ORDER OF ADJUSTMENT
IMPORTANT: Rear wheel camber and front wheel caster are not adjustable on this vehicle. These angles can be measured but are set by design of
the front and rear suspension.
1st Rear toe
2nd Right Front Camber
3rd Left Front Camber
4th Front Toe
IMPORTANT: When performing a wheel alignment after any suspension system component removal and installation, the vehicle must be driven
and/or the suspension system worked (manually bounced at least 20 times) to allow components to locate properly before alignment adjustment.
Road Test
ALIGNMENT, WHEELS & TIRES
