L200 L4-2.2L VIN F (2002)
Torque:
Liquid Line-to-Condenser Block Bolt: 20 N.m (15 ft-lbs)
6. Lower vehicle.
7. Remove suction/liquid line cap and install new seal washer.
8. Install liquid line to suction/liquid line assembly and hand start nut.
9. Install liquid line into inner rail clamp and close.
Torque:
Suction/Liquid Line-to-Suction Pipe Nut: 12 N.m (9 ft-lbs)
10. Connect negative battery cable.
Torque:
Battery Terminal Bolts: 17 N.m (13 ft-lbs)
11. Evacuate, charge, and leak check the A/C system.