saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Engine Controls - Severe Misfire/DTC's P0300 - P0304|Page 1590 > < Engine Controls/Ignition - PCM Calibration/Spark Plugs
Page 1
background image

Spark Plug: All Technical Service Bulletins
Engine Controls - Severe Misfire/DTC's P0300 - P0304

BULLETIN NO.: 03-T-01

ISSUE DATE: January, 2003

CATEGORY TYPE: Engine-01

CATEGORY: Ignition

CORPORATION NO.: 02-06-03-014

SUBJECT:
Severe Engine Misfire on Paired Cylinders (1 and 4 or 2 and 3), DTCs 
P0300 -  P0304 2.2L 4 cyl (L61) Revised Repair Procedure (Replace Ignition Cassette, Install New Spark Plug, Repro gram PCM if Needed)

MODELS AFFECTED:

2002 and 2003 Saturn L-Series equipped with 2.2L 4 cylinder (L61) engines, up to and including VIN 3Y541043

CONDITION:

Some customers may comment on severe engine misfire.

CAUSE:

Internal ignition module failures may be influenced by interaction between spark plug characteristics and PCM software.

CORRECTION:

Once condition has been verified as an ignition module failure, install revised part number spark plugs, check and/or replace PCM calibration and
replace ignition cassette.

SERVICE PROCEDURE

1.

Diagnose misfire condition using latest available service manual information. If condition is diagnosed as a failed ignition cassette, continue with
this procedure, otherwise continue with service manual diagnostic procedure.

2.

Replace spark plugs with the spark plug part number described in this bulletin.

IMPORTANT:

All four spark plugs should be the same part number.

3.

Replace ignition cassette assembly.

4.

Using a portable scan tool, check the current PCM calibration ID. Refer to the calibration table in this bulletin. If the current calibration is listed in
this table, reprogram PCM with the calibration available starting November 2002, on the Saturn Service Stall CD version TIS 11/2002 or later.

Engine Controls - Severe Misfire/DTC's P0300 - P0304|Page 1590 > < Engine Controls/Ignition - PCM Calibration/Spark Plugs