L200 L4-2.2L VIN F (2002)
IMPORTANT: Lubricate O-rings at injector isolators prior to installing injectors into cylinder head.
6. Install fuel rail to cylinder head.
7. Install fuel rail bolts.
Torque:
Fuel Rail Bolts: 10 N.m (89 in-lbs)
8. Re-position fuel line assembly.
NOTE: An open-end wrench must be used to support the fuel lines to rail connection during loosening/tightening to avoid damaging the fuel rail
assembly.
9. Install fuel line bracket and bracket bolt.
Torque:
Transfer Line Fitting-to-Fuel Rail: 10 N.m (89 in-lbs)
