L200 L4-2.2L VIN F (2002)
6. Perform the "Passlock Relearn Procedure" using the SSS. See: Testing and Inspection/Programming and Relearning
7. Ignition Oft for 10 seconds, ignition On.
IMPORTANT: Following PCM reprogramming, the PCM will have to learn the crankshaft notch variation for misfire diagnostics.
8. Perform the crankshaft relearn procedure. See: Testing and Inspection/Programming and Relearning
9. Verify no DTCs exist. (If one exists, refer to the specific DTC diagnostic.)
10. Reset clock and preset radio stations.
