L200 L4-2.2L VIN F (2002)
13.
Install foam tape approximately 110 mm (4.25 in) in length x 11 mm (0.4 in) wide and 12 mm (0.5 in) thick to the inflator module as shown in the
illustration. Use Kent Industries E-V-R Tite Adhesive backed pressure sensitive sponge rubber weatherstrip (Kent P/N 40130) or equivalent.
14.
Install inflator module and fasteners to spaceframe taking care not to twist the airbag inflator when installed.
Tighten
Tighten the Curtain Inflator Retaining Bolt to 10 N.m (89 in-lbs).
