L200 L4-2.2L VIN F (2002)
3. Remove rear transaxle mount through bolt, and transaxle mount-to-frame bolt.
4. Place an approved drain container under pressure and return hoses at steering gear.
5. Remove power steering pump pressure and return hoses from steering gear and allow system to drain.
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST. TO HELP AVOID
PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE OPPOSITE
END FROM WHICH COMPONENTS ARE BEING REMOVED.
6. Raise vehicle on hoist.
7. Remove front wheel and tire assemblies.
8. Remove right front lower splash shield.
9. Disconnect 02 sensor electrical connection.
