L200 L4-2.2L VIN F (2002)
6.
Use special tools KM-907-21, KM-907-22, and KM-671 to press out rear control arm bushing.
7.
Obtain two new front lower control arm rear bushings, P/N 22671497.
Important:
The new front lower control arm rear bushings must be installed with the notched cut-out areas aligned with the weld flanges of front lower
control arm.
8.
Mark outside edges of bushing with a grease pencil or marker to indicate where notched cut-out areas are after installed.
9.
Use special tools KM-907-23, KM-907-24 and KM-671 to press in new rear control arm bushing. Ensure that bushing is fully pressed into and
seated in control arm.
10.
Install control arm onto frame assembly.
11.
Install control arm to frame using new bolts, P/N 11096192, and hand tighten.
