L200 L4-2.2L VIN F (2002)
1. Attach carrier to body with carrier-to-body bolts.
^
Rear Shock Carrier-to-Body Bolts: 55 Nm (40 ft. lbs.)
NOTICE: New nuts and bolts must be used. Torque retention of old nuts and bolts may not be sufficient.
2. Install the carrier assembly to knuckle using a new bolt.
^
Rear Shock Absorber-to-Knuckle: 150 Nm (110 ft. lbs.) + 30° to 45°
3. Install wheelhouse liner assembly.
NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors. Failure to do so can cause wheel bolts
to loosen in service.
4. Install wheel and tire assemblies onto hub.
