L200 L4-2.2L VIN F (2002)
Case: Service and Repair
TRANSAXLE CASE SIDE COVER
TOOLS REQUIRED
-
J41102 Axle Seal Protector
-
J41545 Transaxle Range Switch Alignment Tool
-
J43405 Engine Support Fixture Adapter
-
SA9105E Engine Support Bar Assembly
REMOVAL
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON THE HOIST. TO HELP
AVOID PERSONAL INJURY WHEN A VEHICLE IS ON A HOIST, PROVIDE ADDITIONAL SUPPORT FOR THE VEHICLE ON THE
OPPOSITE END FROM WHICH COMPONENTS ARE BEING REMOVED.
1. Position vehicle on hoist.
2. Remove battery.
2.1
Disconnect battery cables (negative first, positive second).
2.2
Move fan control module. Leave wiring connected, lift module up and away from bracket, and position out of the way.
2.3
Remove battery hold-down bracket.
2.4
Remove battery.
3. Disconnect battery feed to underhood fuse block.
4. Disconnect coolant hose from underhood fuse block.
5. Release retaining tabs on underhood fuse block cover and remove.
6. Release retaining labs (2) on underhood fuse block and roll fuse block back (1) to access electrical connectors.
