L200 L4-2.2L VIN F (2002)
Seals and Gaskets: Service and Repair
Left Side Axle Seal
LEFT SIDE AXLE SEAL
TOOLS REQUIRED
-
J41102 Axle Seal Installer
REMOVAL
1. Remove transaxle case side cover.
NOTICE: Do not score or damage side cover bore when removing axle seal.
2. Remove left axle seal from side cover. Use handle end of hammer.
INSTALLATION
IMPORTANT: You must use Axle Seal Installer J41102 in order to install seal correctly. J41102-1 Axle Seal Installing Driver installs the axle seal
to a given depth.
Install transaxle case side cover. Before axle shaft is reinstalled into the transaxle, install Axle Seal Expansion Cap J41102-2 onto the output shaft, and
install left axle seal into side cover using Axle Seal Installing Driver J41102-1 as shown. Complete installation of case side cover.
