L200 L4-2.2L VIN F (2002)
7. Remove transaxle mount from vehicle.
INSTALLATION
1. Install rear transaxle mount to transaxle and tighten fasteners.
-
Rear Transaxle Mount-to-Transaxle Bolts: 90 Nm (66 ft. lbs.)
2. Install the two transaxle mount bracket to frame attachment fasteners and tighten.
-
Rear Transaxle Mount Bracket-to-Frame Bolts: 60 Nm (44 ft. lbs.)
3. Lower vehicle from hoist.
4. Install and tighten the transaxle mount bracket to frame attachment fastener.
-
Rear Transaxle Mount Bracket-to-Frame Bolts: 60 Nm (44 ft. lbs.)
5. Install the transaxle mount to bracket through bolt.
-
Rear Transaxle Mount Through Bolt: 90 Nm (66 ft. lbs.)