L300 V6-3.0L VIN R (2001)
Keyless Entry Transmitter Battery: Service and Repair
TRANSMITTER BATTERY REPLACEMENT
NOTE:
^
Use of the wrong battery size may damage the transmitter. The correct battery can be obtained by calling Digikey at 1-800-344-4539.
^
When removing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the
transmitter(s).
IMPORTANT: If the transmitter(s) won't work, perform the "RKE SYSTEM CHECK" before replacing the battery. Also, before replacing the battery
in the transmitter(s), make sure that the battery is touching both the negative and positive contacts inside of the transmitter(s).
For battery replacement, use a Panasonic type CR2032, 3-volt battery, or equivalent.
1. Use a small coin, or flathead screwdriver, to separate bottom of transmitter from top.
NOTE: Do not use sharp objects to help slide the battery out of the clip this may result in damage to the circuit board.
2. Remove circuit board from transmitter housing and key pad by pressing on the "LOCK" button.
3. Remove the battery by sliding the battery out of the battery clip. This may require a push from the back side of the clip
