L300 V6-3.0L VIN R (2001)
3.
Remove retaining fasteners from rear wheelhouse panel to fascia.
4.
Remove fascia from vehicle by pulling rearward.
ADJUSTING THE FASCIA MOUNTING SPACER
^
If the fascia is outboard of flush to the quarter panel at the forward most corner, use a rubber mallet and adjust the forward fascia mounting
spacer inboard until a flush condition is achieved.
^
If the fascia is outboard of flush to the quarter panel closer to the rear of the vehicle, use a rubber mallet and adjust the rear fascia mounting
spacer inboard until a flush condition is achieved.