L300 V6-3.0L VIN R (2001)
Rear Door Striker: Adjustments
DOOR STRIKER ADJUSTMENT
To determine if striker adjustment is required proceed as follows.
1. Make certain door is properly aligned within door opening. Make sure door fits opening before proceeding with striker adjustment.
2. Close door onto striker. Note if door drags on striker causing door to move upward or downward upon contact with striker. Note also closing
effort to fully engage latch.
3. Using a soft marker, mark around striker for reference of original position. Loosen striker.
4. Move striker to eliminate drag on striker and door latch and to achieve proper door position within door opening. Start with up/down position,
then position striker to achieve proper alignment to door opening. Set the in/out adjustment for proper door seal engagement making sure door
closing efforts are correct.
5. Torque door striker to body fasteners.
Torque:
Door Striker to Body Fasteners: 20 N.m (15 ft-lbs)