L300 V6-3.0L VIN R (2001)
3.
Remove storage compartment from console.
4.
Remove ashtray and auxiliary power outlet from rear side of center console.
IMPORTANT:
The main power feed (ORN wire with WHT extension) for the trunk interior release handle will be connected to the same wire as the auxiliary power
outlet located in console.
5.
Locate the ORN power feed wire (ckt 1740) for the auxiliary power outlet.
The WHT extension wire supplied in kit will be spliced to the handle ORN wire to extend it and route up to the console area. The WHT extension wire
will then be spliced to the ORN wire (ckt 1740) at the auxiliary power outlet.
NOTICE:
If equipped with leather seats, move rear seat cushion forward before removing rear seat bolster to prevent damage to leather. If seat is not leather,
moving rear seat cushion is not necessary.