L300 V6-3.0L VIN R (2001)
Cross-Member: Service and Repair
Installation
INSTALLATION
1. Raise rear suspension support assembly into vehicle and install using new bolts.
Torque: Rear Suspension Support-to-Body Bolts: 90 Nm (66 ft. lbs.) + 90° to 115°
2. Install upper and lower rear suspension control arms to rear axle control arms using new nuts and bolts.
Torque: Rear Suspension Control Arm-to-Knuckle: 90 Nm (66 ft. lbs.) + 60° to 75°
3. Install stabilizer links to rear axle control arm.
Torque: Rear Stabilizer Bar-to-Knuckle: 55 Nm (41 ft. lbs.)