L300 V6-3.0L VIN R (2001)
5. Remove the center console fasteners.
6. Tilt front seats and console upward to allow carpet to be removed from under seat and console.
7. Remove the carpet from the vehicle.
Installation Procedure
1. Tilt the front seats and the console upward.
2. Install the rear carpet in the vehicle making sure that the carpet is properly fit under the front seat and console.
Notice: Refer to Fastener Notice in Cautions and Notices.
Important: Use Loctite 242(R) Threadlocker (or equivalent) on thread of pinch bolt.
3. Lower the front seats and install the front seat fasteners.
Tighten the seat attachment bolts to 25 Nm (19 lb in).
4. Lower the console and install the console fasteners.
