L300 V6-3.0L VIN R (2001)
3. Install the hinge pillar molding upper push pin fastener.
4. Install the fuse box door.
5. Install the weatherstrip over the hinge pillar molding cover using a flat-blade tool.
Body Lock Pillar Upper Molding Replacement
Body Lock Pillar Upper Molding Replacement
Removal Procedure
1. Remove the front seat shoulder belt outer trim cover exposing the seat belt fastener.
2. Remove the seat belt fastener and remove the seat belt from the seat frame.
3. Using a trim tool, remove the outside center pillar weatherstrip.