L300 V6-3.0L VIN R (2001)
3. Compress inside snap ring and remove. Remove washer plate and compression spring.
4. Remove lock cylinder from liftgate lock cylinder housing.
5. Remove cap and gasket from lock cylinder.
IMPORTANT: When shutter is removed, the shutter springs may fall out.
6. Remove shutter and shutter springs.
7. Insert key into cylinder, turn it a quarter turn clockwise and remove cylinder from housing.
IMPORTANT: When the tumblers are removed from the lock cylinder tumbler, springs may fall out.
8. Push tumblers out of lock cylinder using a thin bladed screwdriver.
9. If necessary, remove sidebar assembly by pushing it inward while tapping the cylinder causing it to fall out.
ASSEMBLY
