L300 V6-3.0L VIN R (2001)
Trunk / Liftgate Lock Cylinder: Procedures
Rear Compartment Lid Lock - Cylinder
REMOVAL
1. Remove decklid trim cover.
2. Remove rear center reflex.
3. Disconnect latch cable from lock cylinder assembly.
4. Remove retainer clip from lock cylinder assembly.
5. Remove cylinder assembly.
INSTALLATION
1. Position cylinder assembly in compartment lid.
2. Install retainer clip.
3. Reconnect latch cable to lock cylinder assembly.
4. Install rear center reflex.
5. Install decklid trim cover.
Rear Compartment Lid Lock Cylinder Coding
DISASSEMBLY