L300 V6-3.0L VIN R (2001)
1. Install the pads and the seals over the luggage carrier studs at all mounting locations.
2. Position the luggage carrier studs through the holes in the roof.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the nuts holding the luggage carrier to the roof and tighten.
Tighten the luggage carrier-to-roof panel nuts to 20 Nm (15 lb ft).
4. Install the sunshade inner retainer clip.
Tighten the sunshade inner retainer clip fastener to 15 Nm (11 lb ft).
5. On vehicles equipped with an illuminated sunshade, connect the sunshade wiring harness.
6. Install the sunshade assembly.
Tighten the sunshade fasteners to 15 Nm (11 lb ft).