L300 V6-3.0L VIN R (2001)
9. Install the encapsulated glass with the 4 bolts.
10. Install the sunroof assembly into the vehicle.
11. Align the encapsulated glass to the roof in the 4 locations, as shown by the arrows, 0-1 mm (0-3/64 in) lower than the roof in the front and to 0-1
mm (0-3/64 in) higher than the roof in the rear. Measure both the front and the rear of the glass in the 4 different locations to ensure a consistent
measurement.
Tighten the encapsulated glass-to-sunroof module fasteners to 4 Nm (35 lb in).
