L300 V6-3.0L VIN R (2001)
Drawstring Design
5.
Stretch one seat cover drawstring across the opposite side and attach to seat frame retaining stud through a loop on the drawstring. Repeat for
opposite side of seat cover.
5.1
Put enough tension on the string to ensure the bottom lip of the seat cover folds tightly over the metal seat carrier.
5.2
Tuck away extra length of drawstring under seat cover.
6.
Position cushion carrier to seat adjuster and secure with fasteners.
Torque:
Seat Cushion Carrier-to-Seat Adjuster
Fasteners: 20 N.m (15 ft-lbs)