L300 V6-3.0L VIN R (2001)
Spoiler: Service and Repair
Rear Spoiler Replacement
Removal Procedure
Care should be taken to prevent water leaks in the rear compartment. Inner spoiler attachment holes in the compartment lid must be sealed with
pre-sealed fasteners. If the sealing is questionable, apply a body caulking compound or equivalent to prevent water intrusion. The gasket used on the
factory option spoiler is used as an aid in manufacturing and is not needed in service.
1. Open the rear compartment.
2. Remove the 3 nuts from the underside of the spoiler.
3. Remove the spoiler from the 2 snap retainers in the rear compartment lid by pushing the spoiler up and forward from the rear being careful not to
scratch the paint.
Installation Procedure