L300 V6-3.0L VIN R (2001)
3. Install caliper bracket-to-steering knuckle bolts.
Torque: Brake Caliper-to-Steering Knuckle Bolts: 95 Nm (70 ft. lbs.)
4. Attach brake pressure hose and install locking plate.
NOTICE: Before installing wheels, remove rust or corrosion from wheel mounting surfaces and brake rotors. Failure to do so can cause wheel
bolts to loosen in service.
5. Install front wheel and tire assemblies.
6. Install wheel bolts and tighten in a star pattern.
6.1
Hand tighten all five wheel bolts.
6.2
Use a torque wrench to tighten wheel bolts using a star pattern.
Torque: Wheel Bolts (Initial Torque): 63 Nm (46 ft. lbs.)
6.3
Use a torque wrench to final tighten wheel bolts using a star pattern.
Torque: Wheel Bolts (Final Torque): 125 Nm (92 ft. lbs.)
7. Lower vehicle from hoist.
