L300 V6-3.0L VIN R (2001)
Coolant Line/Hose: Service and Repair
Heater Inlet/Outlet Hoses and Heater Water Pump
HEATER INLET/OUTLET HOSES AND HEATER WATER PUMP
REMOVAL
1. Disconnect negative battery cable.
2. Drain coolant.
3. Position approved coolant container under vehicle below heater hose connections to catch any coolant that may be trapped in heater hoses.
4. Open heater hose assembly to manifold clamp.
IMPORTANT: Green plastic rings may be found hanging on the pipes after hose removal, these are manufacturing aids and should be discarded.