L300 V6-3.0L VIN R (2001)
13. Install fan and shroud assembly onto radiator lower tabs.
NOTICE: Verify that the pusher fan electrical harness is not between the fan shroud and the radiator.
14. Install fan shroud to radiator bolts.
Torque:
Fan Shroud-to-Radiator Bolts: 4 Nm (35 inch lbs.)
15. Install upper transaxle oil cooler line into radiator end tank retainer.
16. Remove cap and install upper transaxle oil cooler line to radiator end tank.
Torque: Upper Transaxle Cooler Line-to Radiator
End Tank: 25 Nm (18 ft. lbs.)