L300 V6-3.0L VIN R (2001)
Radiator Cooling Fan Motor: Service and Repair
Puller Fan
PULLER FAN
REMOVAL
1. Disconnect negative battery cable.
2. Disconnect positive battery cable.
NOTICE: It is not necessary to disconnect fan control module wiring from module.
3. Remove fan control module by sliding up and off bracket. Lay module and wiring out of the way.
4. Remove battery insulating cover.
5. Remove battery hold down fan control module bracket.
CAUTION: DO NOT TIP BATTERY OVER 45 DEGREE ANGLE OR ACID COULD SPILL.
6. Remove battery.
7. Drain coolant.
8. Remove power steering fluid reservoir to fan shroud bolts and position reservoir rearward in car.
