L300 V6-3.0L VIN R (2001)
22. If timing belt adjustment IS NOT REQUIRED, set the final timing belt tension:
A. Loosen the timing belt tensioner eccentric locking nut.
B. Turn the eccentric counterclockwise to full stop, then back until the reference mark is 2-4 mm (0.078-0.157 in) ABOVE the reference mark on
the flange.
Tighten
Tighten the timing belt tensioner eccentric locking nut 20 Nm (15 lb ft).
C. Hold the timing belt idler pulley eccentrics in place for camshafts 1 & 2 and 3 & 4 with the J 42069-40 adjustment wrench.
Tighten
Tighten both idler pulley bolts 40 Nm (30 lb ft).
23. Inspect the high-points of the timing belt tensioner eccentrics. The idler pulley eccentric high point for camshafts 3 and 4 will be in approximately
