L300 V6-3.0L VIN R (2001)
50.
Install crankshaft balancer.
Tighten
Tighten the crankshaft balancer bolt to 20 Nm (15 lb ft).
51.
Install accessory drive belt tensioner.
52.
Install accessory drive belt tensioner bolts.
Tighten
Tighten the belt tensioner bolt to 40 Nm (30 lb ft).
53.
Install power steering pump pulley.
54.
Install power steering pump pulley bolts.
55.
Snug power steering pump pulley bolts. The bolts will be tightened to proper specification when serpentine drive belt is installed.
56.
Install water pump pulley.
57.
Install water pump pulley bolts. Snug the water pump pulley bolts. The bolts will be tightened to proper specification when the accessory drive belt
is installed.
58.
Install wiring harness channel to front timing belt cover.
Tighten
Tighten the wire harness channel to 6 Nm (53 lb in).