L300 V6-3.0L VIN R (2001)
Oil Filter Cap: 15 Nm (11 ft. lbs.)
5. Install front exhaust manifold pipe assembly and gaskets.
NOTICE: Do not tighten fasteners.
6. Install front exhaust manifold pipe to rear exhaust manifold pipe bolts.
7. Install front exhaust manifold pipe to exhaust manifold nuts.
Torque:
Exhaust Manifold Pipe-to-Exhaust Manifold Nuts: 30 Nm (25 ft. lbs.)
8. Tighten front exhaust manifold pipe to rear exhaust manifold pipe bolts.
Torque:
Exhaust Manifold Pipe Bolts: 20 Nm (15 ft. lbs.)
NOTICE: Always use a nickel-based anti-seize compound Saturn P/N 21485279 (or equivalent) on the threads of the oxygen sensor. If the oxygen
sensor is replaced, do not apply anti-seize to the new sensor. New sensors have anti-seize pre-applied. Never use silicon product; silicon products will
cause damage to oxygen sensor.