L300 V6-3.0L VIN R (2001)
9. Install front exhaust manifold pipe oxygen sensor.
Torque:
Oxygen Sensors (Lower Exhaust Pipe): 45 Nm (33 ft. lbs.)
10. Lower vehicle.
11. Connect front exhaust manifold pipe oxygen sensor electrical connection.
12. Install upper exhaust manifold nuts.
Torque:
Exhaust Manifold Nut: 20 Nm (15 ft. lbs.)
13. Install power steering pipe bracket bolt.
Torque:
Power Steering Pipe Bracket Bolt: 8 Nm (71 inch lbs.)
14. Install two new O-rings onto coolant extension housing.
15. Lubricate O-ring with coolant and install extension housing.