L300 V6-3.0L VIN R (2001)
Air Duct: Service and Repair
Center Connector Duct
REMOVAL
1. Disable SIR. (Refer to "Disabling the SIR System" procedure.)
2. Gently pull on left and right side console extensions to remove extensions.
On power windows
3. Using a small flat blade tool, gently pry upward on rear portion of the power window switch to partially disengage switch from console.
4. Disconnect power window switch harness from switch and remove power window switch.
5. Disengage console park brake boot by squeezing the boot in while pulling upward.
6. Lift park brake boot over park brake assembly.